Corresponding Mount
L-Mount, Sony E-mount, SIGMA SA-mount, Canon EF mount
Sensor Format
Full-frame [DG]
Lens Construction
13 elements in 10 groups
Number of Diaphragm Blades
9 (rounded diaphragm)
Minimum Focusing Distance
25.8cm / 10.2in.
Maximum Magnification Ratio
1:1 (life-size macro)
Dimensions (Diameter × Length)
L-Mount: φ70.8mm × 129.8mm / φ2.8in. × 5.1in.
Sony E-mount: φ70.8mm × 131.8mm / φ2.8in. × 5.2in.
SIGMA SA-mount: φ70.8mm × 105.8mm / φ2.8in. × 4.2in.
* Length is measured from the filter surface to the lens mount.
Weight
L-Mount: 605g / 21.3oz.
Sony E-mount: 570g / 20.1oz.
SIGMA SA-mount: 515g / 18.2oz.
Edition Number
A018
The edition code indicates the year the lens was first released; this may differ from the year of manufacture.
Supplied Accessories
Case
Lens Hood LH708-01
Front Cap LCF-49mm III
Rear Cap LCR II
Mount / Product Barcode
L-Mount: 00-85126-27169-5 (Discontinued)
Sony E-mount: 00-85126-27165-7 (Discontinued)
SIGMA SA-mount: 00-85126-27156-5 (Discontinued)
Canon EF mount: 00-85126-27154-1 (Discontinued)
Product Status
Discontinued
Design prioritizing optical performance
This macro lens prioritizes fine detail at every focusing distance through an extending, floating two-group focus mechanism. Its optical design uses two FLD and two SLD elements plus two aspherical elements to correct aberrations and maintain sharp, clean detail from close-ups to distant subjects.
Designed to minimize flare and ghosting
Optical simulation and Super Multi-Layer Coating suppress unwanted reflections in demanding backlit scenes. The supplied hood helps reduce stray light for strong contrast.
Exclusive low-dispersion glass
Low-dispersion FLD and SLD glass elements help control color fringing and secondary spectrum. Careful element placement improves natural color and definition, especially around fine high-contrast edges.
Focus-by-wire system for comfortable and precise focusing
A coreless DC motor and electronic focusing system provide refined, low-noise adjustment. A generous focus-ring rotation supports accurate manual focusing in close-up photography.
Fast AF with full-time manual focus
The focus ring allows fine manual adjustment while working with supported autofocus operation. Exact full-time manual-focus behavior may vary by mount.
Mount with Dust and Splash Resistant Structure
Rubber sealing around the lens mount reduces entry of dust and water droplets. This is dust and splash resistance, not waterproofing; SIGMA SA-mount is excepted from this sealing statement.
Rounded diaphragm
A nine-blade rounded diaphragm creates soft out-of-focus highlights for natural-looking backgrounds.
High-precision, rugged brass bayonet mount
The treated brass mount is engineered for accurate alignment and long-term durability.
Compatible with full-frame Sony E-mount cameras
The Sony E-mount model is designed to work directly on compatible Sony cameras without Mount Converter MC-11, supporting applicable camera functions such as continuous AF and in-camera optical correction. Availability depends on the camera model.
Compatible with Canon Lens Aberration Correction
Compatible Canon EF cameras can apply supported peripheral illumination, chromatic aberration, and distortion correction. The specific functions and firmware requirements vary by camera. Consult the official compatibility information.
Canon EF camera compatibility notes
For supported Canon EF-mount bodies, SIGMA lists EOS R5, R6, R, RP and Ra (via appropriate support), EOS-1D X Mark III and Mark II, EOS 5Ds / 5Ds R / 5D Mark IV, EOS 6D Mark II, EOS 90D, 80D, 8000D, 9000D, and selected EOS Kiss / Rebel models. Some older SIGMA Global Vision lenses require firmware version 2.00 or later; supported lens corrections depend on the camera and settings.
Compatible with ELECTRONIC FLASH MACRO EM-140 DG
For the SIGMA SA mount, a separately sold 65mm macro flash adapter can be used with ELECTRONIC FLASH MACRO EM-140 DG. Mount-specific limitations apply.
View SIGMA macro flash detailsCompatible with SIGMA TELE CONVERTERS
For supported DSLR mounts, TC-1401 produces a 98mm F4 macro configuration (autofocus from approximately 0.5m to infinity), while TC-2001 produces a 140mm F5.6 configuration with manual focus. These teleconverters are not available for L-Mount and Sony E-mount versions.
View teleconverter detailsCompatible with Mount Converter MC-11
Mount Converter MC-11 permits supported SIGMA SA and SIGMA Canon-compatible interchangeable lenses to be used with compatible Sony E-mount bodies. This applies to converter-supported DSLR-mount models, not native Sony E-mount lenses.
View Mount Converter MC-11
Reviews
There are no reviews yet.